Neutralizing Rinse restores the pH balance on all hardscape surfaces and is mandatory prior to sealing whenever any acid cleaning, etching or staining has taken place. This will ensure proper sealer adhesion.
If Pro-Grade Cleaner has been used neutralizing rinse is not required.
This product is non-toxic and color safe for poured in place concrete, stamped concrete and pavingstones.
USE ON:
All concrete, masonry brick, tile and stone.
FEATURES:
1. Non-toxic and environmentally safe
2. Safe for colored and stamped concrete
3. Prevents sealer failure due to acid staining
4. Makes 5 gallons of rinse
COVERAGE:
One 12 oz. package mixed into 5 gallons of water will neutralize approximately 1000 sq. ft. of surface area.
APPLICATION:
Dissolve the contents of the package in 5 gallons of warm water (where available). Flood the surface and allow to stand 2-5 minutes. Surface may be scrubbed to clean as well as neutralize. Thoroughly rinse with clean water. Allow surface to dry at least 24 hours before sealing.